Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
H-beams are structural sections; HEA and HEB designations describe different section series and are not interchangeable by nominal height alone.
HEA wide-flange beams: review actual height, flange width, thicknesses and mass for each nominal size.Read more
Standards and applicability
Use the exact series and section table: EN 10365 dimensions, EN 10034 I/H tolerances or EN 10279 channel tolerances; a UE/GOST 8240 section is not automatically UPN. Material references below are EN 10025-2, with the actual web/flange thickness band where known. The hub compares 3 < t ≤ 63 mm bands. Tensile/yield values do not establish member capacity. Elongation, orientation, impact specimen and acceptance conditions require the complete order specification.
Mechanical reference table
Mechanical reference table
Grade / material
Scope / condition
Re / Rp0.2 (MPa)
Rm (MPa)
A min. (%)
Impact reference
S235JR
3 < t ≤ 16 mm
≥235
360–510
—
27 J / +20°C
S235JR
16 < t ≤ 40 mm
≥225
360–510
—
27 J / +20°C
S235JR
40 < t ≤ 63 mm
≥215
360–510
—
27 J / +20°C
S275JR
3 < t ≤ 16 mm
≥275
410–560
—
27 J / +20°C
S275JR
16 < t ≤ 40 mm
≥265
410–560
—
27 J / +20°C
S275JR
40 < t ≤ 63 mm
≥255
410–560
—
27 J / +20°C
S355J2
3 < t ≤ 16 mm
≥355
470–630
—
27 J / −20°C
S355J2
16 < t ≤ 40 mm
≥345
470–630
—
27 J / −20°C
S355J2
40 < t ≤ 63 mm
≥335
470–630
—
27 J / −20°C
Chemical composition references
Chemical composition references
Grade / material
Scope / condition
C (%)
Mn (%)
Si (%)
P (%)
S (%)
Cr / CEV (%)
S235JR
3 < t ≤ 16 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
16 < t ≤ 40 mm
≤0.17
≤1.40
—
≤0.035
≤0.035
—
S235JR
40 < t ≤ 63 mm
≤0.20
≤1.40
—
≤0.035
≤0.035
—
S275JR
3 < t ≤ 16 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
16 < t ≤ 40 mm
≤0.21
≤1.50
—
≤0.035
≤0.035
—
S275JR
40 < t ≤ 63 mm
≤0.22
≤1.50
—
≤0.035
≤0.035
—
S355J2
3 < t ≤ 16 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
16 < t ≤ 40 mm
≤0.20
≤1.60
≤0.55
≤0.025
≤0.025
—
S355J2
40 < t ≤ 63 mm
≤0.22
≤1.60
≤0.55
≤0.025
≤0.025
—
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
St37, St44 and St52 · historical DIN 17100 reference
Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.
St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type
C (%)
Mn (%)
Si (%)
P (%)
S (%)
St37-2 / 1.0037
≤0.17
—
—
≤0.050
≤0.050
St44-2 / 1.0044
≤0.21
—
—
≤0.050
≤0.050
St52-3 / 1.0570
≤0.20
≤1.60
≤0.55
≤0.040
≤0.040
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
HEA wide-flange beams: review actual height, flange width, thicknesses and mass for each nominal size.
H-beams are structural sections; HEA and HEB designations describe different section series and are not interchangeable by nominal height alone.
Specification and dimensions
H-beams: exact series and designation such as HEA 100 or HEB 200, plus length. Confirm overall height, flange width, web thickness and flange thickness against the specified section table. HEA and HEB have different dimensions and mass; equal-angle leg dimensions do not apply.
Grades and applicable standards
Dimensions: EN 10365; tolerances on shape and dimensions: EN 10034. Specify the full material grade separately, for example S235JR, S275JR or S355J2 to EN 10025-2, together with the required inspection documents. HEA and HEB of the same nominal size have different actual dimensions, thicknesses and mass. The designation number is not always the actual section height. IPE, HEA and HEB are separate series; confirm the section table, required length, quantity and delivery destination with EMRA Steel.
Applications and project requirements
H-beams are used in structural columns, frames and other designed members. The exact HE series, section properties and connection requirements must be selected from the project specification.
Inspection and traceability
Agree heat or batch identification, chemical analysis, applicable tests and dimensional checks before ordering. Specify inspection documents, acceptance criteria and any independent inspection requirements.
Sizes, weights and quotation guidance
HEA 100
HEA 100 has an actual section height of 96 mm, flange width 100 mm, web thickness 5 mm and flange thickness 8 mm. Reference mass is approximately 16.7 kg/m; calculated weights are 100.2 kg for a 6 m length and 200.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 100
HEA 120
HEA 120 has an actual section height of 114 mm, flange width 120 mm, web thickness 5 mm and flange thickness 8 mm. Reference mass is approximately 19.9 kg/m; calculated weights are 119.4 kg for a 6 m length and 238.8 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 120
HEA 140
HEA 140 has an actual section height of 133 mm, flange width 140 mm, web thickness 5.5 mm and flange thickness 8.5 mm. Reference mass is approximately 24.7 kg/m; calculated weights are 148.2 kg for a 6 m length and 296.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 140
HEA 160
HEA 160 has an actual section height of 152 mm, flange width 160 mm, web thickness 6 mm and flange thickness 9 mm. Reference mass is approximately 30.4 kg/m; calculated weights are 182.4 kg for a 6 m length and 364.8 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 160
HEA 180
HEA 180 has an actual section height of 171 mm, flange width 180 mm, web thickness 6 mm and flange thickness 9.5 mm. Reference mass is approximately 35.5 kg/m; calculated weights are 213 kg for a 6 m length and 426 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 180
HEA 200
HEA 200 has an actual section height of 190 mm, flange width 200 mm, web thickness 6.5 mm and flange thickness 10 mm. Reference mass is approximately 42.3 kg/m; calculated weights are 253.8 kg for a 6 m length and 507.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 200
HEA 220
HEA 220 has an actual section height of 210 mm, flange width 220 mm, web thickness 7 mm and flange thickness 11 mm. Reference mass is approximately 50.5 kg/m; calculated weights are 303 kg for a 6 m length and 606 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 220
HEA 240
HEA 240 has an actual section height of 230 mm, flange width 240 mm, web thickness 7.5 mm and flange thickness 12 mm. Reference mass is approximately 60.3 kg/m; calculated weights are 361.8 kg for a 6 m length and 723.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 240
HEA 260
HEA 260 has an actual section height of 250 mm, flange width 260 mm, web thickness 7.5 mm and flange thickness 12.5 mm. Reference mass is approximately 68.2 kg/m; calculated weights are 409.2 kg for a 6 m length and 818.4 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 260
HEA 280
HEA 280 has an actual section height of 270 mm, flange width 280 mm, web thickness 8 mm and flange thickness 13 mm. Reference mass is approximately 76.4 kg/m; calculated weights are 458.4 kg for a 6 m length and 916.8 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 280
HEA 300
HEA 300 has an actual section height of 290 mm, flange width 300 mm, web thickness 8.5 mm and flange thickness 14 mm. Reference mass is approximately 88.3 kg/m; calculated weights are 529.8 kg for a 6 m length and 1059.6 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 300
HEA 320
HEA 320 has an actual section height of 310 mm, flange width 300 mm, web thickness 9 mm and flange thickness 15.5 mm. Reference mass is approximately 97.6 kg/m; calculated weights are 585.6 kg for a 6 m length and 1171.2 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 320
HEA 340
HEA 340 has an actual section height of 330 mm, flange width 300 mm, web thickness 9.5 mm and flange thickness 16.5 mm. Reference mass is approximately 105 kg/m; calculated weights are 630 kg for a 6 m length and 1260 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 340
HEA 360
HEA 360 has an actual section height of 350 mm, flange width 300 mm, web thickness 10 mm and flange thickness 17.5 mm. Reference mass is approximately 112 kg/m; calculated weights are 672 kg for a 6 m length and 1344 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 360
HEA 400
HEA 400 has an actual section height of 390 mm, flange width 300 mm, web thickness 11 mm and flange thickness 19 mm. Reference mass is approximately 125 kg/m; calculated weights are 750 kg for a 6 m length and 1500 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 400
HEA 450
HEA 450 has an actual section height of 440 mm, flange width 300 mm, web thickness 11.5 mm and flange thickness 21 mm. Reference mass is approximately 140 kg/m; calculated weights are 840 kg for a 6 m length and 1680 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 450
HEA 500
HEA 500 has an actual section height of 490 mm, flange width 300 mm, web thickness 12 mm and flange thickness 23 mm. Reference mass is approximately 155 kg/m; calculated weights are 930 kg for a 6 m length and 1860 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 500
HEA 550
HEA 550 has an actual section height of 540 mm, flange width 300 mm, web thickness 12.5 mm and flange thickness 24 mm. Reference mass is approximately 166 kg/m; calculated weights are 996 kg for a 6 m length and 1992 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 550
HEA 600
HEA 600 has an actual section height of 590 mm, flange width 300 mm, web thickness 13 mm and flange thickness 25 mm. Reference mass is approximately 178 kg/m; calculated weights are 1068 kg for a 6 m length and 2136 kg for a 12 m length. Request 6 m, 12 m or agreed cut lengths, subject to supply confirmation. State the exact series when requesting a price; actual delivery weight depends on rolling tolerances and the agreed weighing basis. HEA 600
Frequently asked questions
Does an example mean immediate availability?
No. Examples are enquiry references; stock and delivery must be confirmed for the complete specification.
Can a different grade or standard be substituted?
Only after the proposed material and the project requirements have been technically reviewed.
Quotation requirements
For an H-beam quotation, provide HEA, HEB or the specified series, nominal designation, length, grade and quantity. Compare prices only for matching series and specifications. Get a quote
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Grade enquiries for HEA steel beams
HEA steel beams S235JR
For HEA steel beams S235JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEA steel beams S275JR
For HEA steel beams S275JR, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
HEA steel beams S355J2
For HEA steel beams S355J2, confirm the complete material standard and edition, chemical analysis, delivery condition and inspection certificate. Review the offered material against the intended processing or project requirements. The designation is an enquiry reference; availability and equivalence to other grades require confirmation.
