Review Ferro alloys for the Ferromanganese (FeMn) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.
Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.
For FeMn, define manganese content and carbon classification together with silicon, phosphorus and sulphur limits, particle size and packaging. The carbon requirement and analysis must be stated explicitly; the alloy name alone is not a complete grade.
Ferro alloys Ferromanganese (FeMn) Technical and buying guide
EMRA Steel
Review Ferro alloys for the Ferromanganese (FeMn) specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.Read more
Standards and applicability
Set numeric acceptance limits and sampling for the actual product and lot; these analysis tables identify required enquiry fields, not a universal grade or a declared shipment analysis. State dry/as-received basis, moisture, particle distribution and settlement weighing where applicable. Use the applicable analytical methods agreed in the contract; structural tensile/yield tables do not apply to these feedstocks.
Analysis and acceptance matrix
Analysis and acceptance matrix
Analysis item
Unit
Acceptance limit
Mn
%
Agreed in the order
Si
%
Agreed in the order
C
%
Agreed in the order
P
%
Agreed in the order
S
%
Agreed in the order
Particle size
mm
Agreed in the order
Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.
Inspection and export enquiry
Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.
Chemistry references and commercial grades
Published commercial specification examples, not universal ISO grade limits. Specify the alloy, carbon class, minimum Mn/Si, maximum impurities, size distribution and fines allowance. ISO 5446 covers FeMn, ISO 5447 FeSiMn and ISO 5445 FeSi; select the edition and exact designation in the order. HC/MC/LC mean high/medium/low carbon. FeSi 75 is a nominal trade designation; impurity limits distinguish these examples.
Ferro manganese: HC, MC and LC commercial analyses
Ferro manganese: HC, MC and LC commercial analyses
Grade / commercial type
Mn (%)
Si (%)
C (%)
P (%)
S (%)
HC FeMn 75
≥75
≤1.20
≤7.00
≤0.25
≤0.02
MC FeMn 78 / C1.0
≥78
≤1.00
≤1.00
≤0.20
—
MC FeMn 80 / C0.5
≥80
≤1.00
≤0.50
≤0.20
—
LC FeMn 80 / C0.1
≥80
≤1.00
≤0.10
≤0.10
—
LC FeMn 85 / C0.1
≥85
≤1.00
≤0.10
≤0.10
—
Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.
For FeMn, define manganese content and carbon classification together with silicon, phosphorus and sulphur limits, particle size and packaging. The carbon requirement and analysis must be stated explicitly; the alloy name alone is not a complete grade.
Choosing this specification
For Ferromanganese (FeMn), use the product-specific analysis and acceptance requirements below. Confirm sampling, particle-size limits, moisture where relevant and the agreed delivery basis before comparing offers.
Grades, standards and inspection requirements for this product: Ferro alloys
Buying Ferro alloys Ferromanganese (FeMn) and requesting a price
The price for Ferro alloys Ferromanganese (FeMn) depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.
For buying and price enquiries for Ferro alloys Ferromanganese (FeMn), specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.
Preparing an enquiry for Ferro alloys Ferromanganese (FeMn)
Include Ferro alloys Ferromanganese (FeMn), the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.
Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides
Specification enquiries for Ferro alloys Ferromanganese (FeMn)
Ferro alloys Ferromanganese (FeMn) FeSiMn
For Ferro alloys Ferromanganese (FeMn) FeSiMn, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
Ferro alloys Ferromanganese (FeMn) FeMn
For Ferro alloys Ferromanganese (FeMn) FeMn, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.
