8 mm diameter · Grades, specifications, buying and price guidance
Request smooth hot-rolled wire rod 8 mm in coils with the grade and surface quality defined for your manufacturing process. Distinguish plain wire rod from ribbed reinforcing steel when preparing the enquiry. EMRA Steel reviews the application, quantity, handling limits and destination before confirming supply and delivery terms.
Get a quote ↗Request smooth hot-rolled wire rod 8 mm in coils with the grade and surface quality defined for your manufacturing process. Distinguish plain wire rod from ribbed reinforcing steel when preparing the enquiry. EMRA Steel reviews the application, quantity, handling limits and destination before confirming supply and delivery terms. Identify smooth wire rod 8 mm in coil form and specify the required diameter tolerance and ovality. Include the coil weight range and inner and outer dimensions accepted by your uncoiling and lifting equipment. If your project needs ribbed reinforcement instead, state that product separately; the same nominal diameter does not make the products interchangeable. Select the grade for the finished-wire product and production route. SAE 1006, SAE 1008, SAE 1012, 3SP and RST34 are enquiry references requiring the full specification and offered-material review. Mesh grade, high carbon and cold-heading quality are not interchangeable grade designations. Chemistry, surface requirements and any mechanical acceptance must be agreed for the actual order. For SAE 1006, include the applicable chemical-composition requirements, target finished-wire diameter and drawing route. State any restrictions on residual elements, scale or surface defects. Confirm the heat analysis and required test evidence against your specification rather than assuming a generic chemistry range. For SAE 1008, define the intended product, drawing or forming stages and required surface condition. Add coil handling limits, quantity and inspection documents. A shared 8 mm diameter does not make an SAE 1008 offer technically equivalent to another grade or establish suitability for cold heading. An SAE 1012 enquiry should identify the governing composition requirements and intended manufacturing process. Specify any heat treatment and the properties required at the relevant processing stage. Confirm the offered material and acceptance evidence before approving a substitution. For 3SP, provide the complete standard designation, edition and required analysis from your purchasing specification. Review the offered certificate and drawing suitability for the intended application; an equivalent SAE designation is not assumed. For RST34, include the full standard and edition, required composition, application and inspection scope. Ask for the offered material certificate to be checked against these requirements before order confirmation rather than treating the grade name alone as evidence of drawing performance. Compare published chemical reference limits for SAE 1006, SAE 1008, SAE 1012, 3SP and RST34, expressed as percentages by mass. Reference A is a published SAE wire-rod grade guide; reference B consists of separate producer specifications for ST-3sp and Rst34. Each row retains its own reference basis. These are not actual heat results, confirmed EMRA stock specifications or universal limits for every product carrying the same grade name. For reference A, silicon is agreed with the buyer. The ST-3sp and Rst34 values in reference B belong to those individual producer specifications and must not be relabelled as universal GOST or DIN limits. Do not infer a DIN 17100 designation for RST34 or an EN equivalent for 3SP from this table. Confirm the full grade, applicable standard and edition, processing requirements and offered chemical limits before purchase. The mill test certificate records the actual heat analysis. A similar chemistry or shared diameter does not establish grade equivalence. ASTM A510/A510M and ISO 16120-2 address wire rod requirements in their respective scopes. Select the applicable specification and edition for the order rather than combining unrelated limits. State any requirement for an EN 10204 type 3.1 inspection certificate, heat identification, chemical analysis and agreed test results at the enquiry stage; the document scope is confirmed with the offer. An 8 mm enquiry may concern drawn wire, mesh-wire feedstock or a forming operation, subject to a defined grade and process specification. State the required finished product, reductions and surface acceptance. Cold heading and fastener manufacture need their own quality requirements; smooth low-carbon wire rod is not automatically CHQ material or certified concrete reinforcement. Define coil securing, labels, weather protection and any surface-treatment requirements for the proposed road or sea shipment. Include the maximum handling weight and receiving equipment. Request a quotation to the named city or port with the delivery rule stated explicitly: DAP names a destination place, CFR or CIF name a destination port, and FOB names a shipment port. Packing, loading arrangements and inspection are confirmed for the proposed shipment. The quotation depends on the grade, chemical and surface requirements, dimensional acceptance, coil configuration, inspection scope, quantity and shipment basis. Freight, timing and requested documentation can change the offer. Compare like-for-like specifications and named delivery points; the website does not publish a fixed unit price or imply stock availability. Send an 8 mm enquiry with smooth or ribbed product identity stated explicitly, the full grade and standard, quantity and unit, downstream process, coil limits and destination. Example enquiry: smooth wire rod 8 mm, SAE 1008 to the agreed purchase specification, for drawing, quantity in metric tonnes, with required surface inspection and delivery to a named place. Ask for the available shipment quantity for the specified grade, packing and route. Minimum order quantity and loading capacity are confirmed with the quotation. A 25-tonne enquiry does not by itself establish an MOQ or mean that one container can carry that quantity on every route. Include the certificate requirement in your enquiry and purchase specification. Confirm the proposed inspection document, heat or batch traceability and test scope with the offered material before ordering. This page does not guarantee the same certificate for every possible supply option. Suitability depends on the specified finished-wire properties, steel chemistry and processing route. Do not assume that low-carbon SAE 1006 or SAE 1008 can replace a grade intended for spring or rope wire. Provide the target application and acceptance specification so a suitable material option can be reviewed. Compare the full wire rod diameter range and grade selection guidance. Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guidesRead more
Wire Rod 8 mm Specifications
Wire Rod 8 mm Grades
Wire rod 8 mm SAE 1006
Wire rod 8 mm SAE 1008
Wire rod 8 mm SAE 1012
Wire rod 8 mm 3SP
Wire rod 8 mm RST34
Wire Rod 8 mm Chemical Composition
Grade C Mn Si P max. S max. SAE 1006 0.08 max. 0.25–0.40 By agreement 0.040 0.050 SAE 1008 0.10 max. 0.30–0.50 By agreement 0.040 0.050 SAE 1012 0.10–0.15 0.30–0.60 By agreement 0.040 0.050 3SP (ST-3sp reference) 0.14–0.22 0.45–0.65 0.30 max. 0.020 0.020 RST34 0.11 max. 0.30–0.50 0.13 max. 0.020 0.020 Standards and Inspection Documents
Applications and Surface Quality
Export Packing and Delivery for 8 mm Coils
Wire Rod 8 mm Price Factors
Buying Wire Rod 8 mm
Wire Rod 8 mm Buyer Questions
What is the minimum order quantity for 8 mm wire rod?
Can I request an EN 10204 type 3.1 certificate?
Is SAE 1006 or SAE 1008 suitable for high-tensile wire?
Request a 8 mm wire rod quotation
