Steel slab 200 × 1000 × 6000 mm

Review Steel slab for the 200 × 1000 × 6000 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.

Steel slab 200 × 1000 × 6000 mm: Quick reference

Steel slab 200 × 1000 × 6000 mm
Parameter	Value
Size / form	200 × 1000 × 6000 mm
Wall / product thickness	200 mm
Mass	9420.000 kg
Dimensional / material references	Agreed in the order
Grade / material	Agreed in the order

Geometric estimates exclude rolling tolerances, coatings and process losses; hollow and rolled-section references include their own section-table basis. Calculated bar weights use unrounded mass. Values are not measured shipment weights. Confirm length, grade, manufacturing route, packing and supply in the offer; the existing image illustrates the product family.

Reference dimensions: 200 × 1000 × 6000 mm. At a nominal steel density of 7850 kg/m³, calculated mass is approximately 9420 kg per piece. Actual weighing, dimensional tolerances, grade and inspection requirements must be agreed before ordering. 200 × 1000 × 6000 mm

Request a quotation

Steel slab 200 × 1000 × 6000 mm Technical and buying guide

EMRA Steel

Review Steel slab for the 200 × 1000 × 6000 mm specification. Check material grade, dimensions, inspection documents and delivery requirements before requesting a quotation.

Standards and applicability

Specify the cast cross-section and cut length, full heat chemistry, deoxidation, surface acceptance, internal soundness and downstream rolling route. Finished EN 10025 mechanical values cannot certify an unrolled billet or slab. For 3SP/5SP requests, provide the complete GOST or other agreed specification and edition; no universal numerical chemistry is assigned from a short commercial name.

Analysis and acceptance matrix

Analysis and acceptance matrix
Analysis item	Unit	Acceptance limit
C	%	Agreed in the order
Mn	%	Agreed in the order
Si	%	Agreed in the order
P	%	Agreed in the order
S	%	Agreed in the order
Al	%	Agreed in the order
Nb	%	Agreed in the order
V	%	Agreed in the order
Ti	%	Agreed in the order

Selected percentages by mass and test values are reference requirements within the stated scope, not the actual heat analysis or a complete specification. A dash means no value is declared here, not zero. Compare the offered heat and test results with the applicable specification and inspection document. If EN 10204 type 3.1 is required, agree document availability, heat traceability and test scope before ordering.

Inspection and export enquiry

Send the exact product, size, full grade and standard edition, delivery condition, quantity, test requirements and named destination. Confirm cutting, coating, bundle or coil mass, protection, unloading and the Incoterms delivery point in the quotation. The destination guidance below supports port and inland comparisons; it does not confirm local stock or a fixed price.

Chemistry references and commercial grades

3SP and 5SP · GOST 380-2005 ladle analysis

3SP and 5SP refer here to fully killed Ст3сп and Ст5сп. These chemistry references support billet/slab enquiries; casting quality, residual elements, steelmaking-route exceptions and the downstream product standard remain separate order requirements. Finished rolled-steel mechanical properties do not certify an as-cast billet or slab.

3SP and 5SP · GOST 380-2005 ladle analysis
Grade / commercial type	C (%)	Mn (%)	Si (%)	P (%)	S (%)
3SP / Ст3сп	0.14–0.22	0.40–0.65	0.15–0.30	≤0.040	≤0.050
5SP / Ст5сп	0.28–0.37	0.50–0.80	0.15–0.30	≤0.040	≤0.050

Reference values are not shipment analysis or an inventory promise. Agree the complete specification, sampling basis, test methods and acceptance limits before ordering; confirm actual results on the heat/lot certificate. A dash means no numeric limit is stated in this selected reference, not zero.

Requested minimum manganese: 0.50% and 0.60%

Mn +0.50 and Mn +0.60 mean Mn ≥0.50% and Mn ≥0.60%. The table intersects each buyer minimum with the grade range. They are optional purchase limits, not new standard grade names. St52-3 has a maximum Mn limit in the reference below; a minimum of 0.50% or 0.60% requires separate mill agreement.

Requested minimum manganese: 0.50% and 0.60%
Grade / commercial type	Buyer requirement	Compatible Mn range (%)
3SP	Mn ≥0.50%	0.50–0.65
3SP	Mn ≥0.60%	0.60–0.65
5SP	Mn ≥0.50%	0.50–0.80
5SP	Mn ≥0.60%	0.60–0.80

St37, St44 and St52 · historical DIN 17100 reference

Ladle-analysis reference for St37-2, St44-2 and St52-3 at t ≤16 mm only. Bare St37/St44/St52 names need a suffix, edition and delivery condition. Other thicknesses and product analysis have different rules. These legacy grades are not automatically equivalent to EN grades or interchangeable with CK45/CK60. For semi-finished feedstock, agree chemistry and downstream qualification separately.

St37, St44 and St52 · historical DIN 17100 reference
Grade / commercial type	C (%)	Mn (%)	Si (%)	P (%)	S (%)
St37-2 / 1.0037	≤0.17	—	—	≤0.050	≤0.050
St44-2 / 1.0044	≤0.21	—	—	≤0.050	≤0.050
St52-3 / 1.0570	≤0.20	≤1.60	≤0.55	≤0.040	≤0.040

Size specifications: Steel slab 200 × 1000 × 6000 mm

Choosing this specification

For 200 × 1000 × 6000 mm, agree the dimension order and whether the material is supplied as coil or cut lengths. Check usable width, cutting layout and flatness before comparing yield; nominal geometry does not include trimming or process losses. At nominal geometry and 7850 kg/m³ steel density, the reference is 9420.000 kg per piece. This calculation excludes tolerances, coatings, corner radii and process losses; it is not certified shipping weight or a load rating. Compared with 200 × 1250 × 6000 mm, the nominal geometric reference is 20.0% lower on the same basis. This comparison supports quantity planning; it does not establish interchangeability.

Grades, standards and inspection requirements for this product: Steel slab

Buying Steel slab 200 × 1000 × 6000 mm and requesting a price

The price for Steel slab 200 × 1000 × 6000 mm depends on the material specification, quantity, production or processing requirements, inspection, packing, freight and delivery schedule. Compare offers on the same technical specification and delivery basis; confirm availability and quotation validity before ordering.

For buying and price enquiries for Steel slab 200 × 1000 × 6000 mm, specify your delivery destination: Georgia (including Tbilisi), Turkey (including Ankara and Istanbul), the United Arab Emirates (UAE, including Dubai), Kuwait, Oman or Qatar. Send the required quantity, grade or chemical analysis, dimensions and inspection scope. Freight, delivery terms and shipment timing affect the quotation; supply options and destination documentation require confirmation before an order is agreed.

Preparing an enquiry for Steel slab 200 × 1000 × 6000 mm

Include Steel slab 200 × 1000 × 6000 mm, the required grade and complete standard designation, order quantity, length or coil limits where applicable, inspection documents and the exact delivery destination. Confirm traceability, packing, commercial terms and the shipment schedule with EMRA Steel.

Choose the product specification first; destination and shipment details belong in the delivery enquiry. Destination enquiry guides

Specification enquiries for Steel slab 200 × 1000 × 6000 mm

Steel slab 200 × 1000 × 6000 mm Chemical analysis

For Steel slab 200 × 1000 × 6000 mm Chemical analysis, define the applicable specification, acceptance limits, sampling and inspection documents. Include quantity and delivery destination so EMRA Steel can review the technical requirements and quotation basis.

Request a quotation